The recommended power-on sequence is to apply power to the VCC pin first, followed by the VDD pin. This ensures that the internal voltage regulators are properly initialized.
The I2C interface on the LPC_072_CTP can be configured using the I2C registers. Set the I2C clock frequency using the I2CCLK register, and configure the I2C pins using the PINCON register. Refer to the LPC072 datasheet for more information.
The maximum clock frequency supported by the LPC_072_CTP is 12 MHz. However, the actual clock frequency may be limited by the specific application and the quality of the external clock source.
The touchpad interface on the LPC_072_CTP is based on the I2C protocol. Use the I2C registers to configure the touchpad interface, and read the touchpad data using the I2C data registers. Refer to the LPC072 datasheet and the touchpad controller datasheet for more information.
The power consumption of the LPC_072_CTP in sleep mode is typically around 10-20 uA, depending on the specific sleep mode and the external components used. Refer to the LPC072 datasheet for more information on power consumption in different operating modes.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LPC_072_CTP Overview
Use the download button to access the LPC_072_CTP 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LPC_0,
or try a keyword search, such as Optoelectronic Accessories
