The recommended PCB footprint for the LPS0300H4700JB is a pad size of 3.3mm x 2.5mm with a 1.1mm hole in the center for the inductor's lead.
The LPS0300H4700JB has a maximum operating temperature of 125°C. Ensure good airflow around the inductor, and consider using a heat sink or thermal pad if the inductor will be operating near its maximum current rating.
The LPS0300H4700JB has a saturation current rating of 47A. Exceeding this current may cause the inductor to saturate, reducing its inductance and potentially causing system instability.
Yes, the LPS0300H4700JB is suitable for high-frequency applications up to 1MHz. However, be aware that the inductor's impedance will increase with frequency, affecting its performance.
Use a suitable adhesive, such as a thermally conductive epoxy, to secure the inductor to the PCB. Ensure the inductor is properly aligned with the PCB pads and that the adhesive is fully cured before operating the circuit.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LPS0300H4700JB Overview
Use the download button to access the LPS0300H4700JB 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LPS03,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
