The recommended PCB land pattern for the LSENC2016KKT2R2M is a rectangular pad with dimensions of 2.5mm x 1.6mm, with a 0.5mm hole in the center for the inductor's terminal. The pad should be connected to a copper pour or a ground plane to ensure good thermal dissipation.
The LSENC2016KKT2R2M is designed to operate up to 1MHz, but its behavior under high-frequency switching conditions depends on the specific application and circuit design. In general, the inductor's impedance will increase with frequency, and it may exhibit some self-resonance. It's recommended to perform simulations and testing to ensure the inductor meets the requirements of the specific application.
The LSENC2016KKT2R2M has a rated operating temperature range of -40°C to +125°C, but its performance may degrade at higher temperatures. The inductor's impedance and inductance may decrease with increasing temperature, and it may experience some thermal aging. If the application requires operation above 125°C, it's recommended to consult with the manufacturer or perform additional testing to ensure the inductor meets the requirements.
The LSENC2016KKT2R2M has a rated current of 2.2A, but it can handle high-current surges or spikes up to 3.3A for short durations (typically <1ms). However, repeated or prolonged exposure to high-current surges may cause the inductor to overheat or experience some degradation. It's recommended to add protection circuitry, such as a fuse or a current limiter, to prevent damage to the inductor and surrounding components.
The LSENC2016KKT2R2M is a commercial-grade inductor, and its reliability and performance may not meet the requirements of high-reliability or safety-critical applications. If the application requires high reliability or safety, it's recommended to consult with the manufacturer or consider using a more specialized or high-reliability inductor.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
LSENC2016KKT2R2M Overview
Use the download button to access the LSENC2016KKT2R2M schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LSENC,
or try a keyword search, such as Fixed Inductors
