Part Image

LT1363CS8#PBF - Analog Devices

Description: LINEAR TECHNOLOGY - LT1363CS8#PBF - Operational Amplifier, Single, 1 Amplifier, 70 MHz, 1000 V/µs, ± 2.5V to ± 15V, SOIC, 8 Pins ■ 70MHz Gain Bandwidth ■ 1000V/µs Slew Rate ■ 7.5mA Maximum Supply Current ■ 9nV/√Hz Input Noise Voltage ■ Unity-Gain Stable ■ C-LoadTM Op Amp Drives All Capacitive Loads ■ 1.5mV Maximum Input Offset Voltage ■ 2µA Maximum Input Bias Current ■ 350nA Maximum Input Offset Current ■ 50mA Minimum Output Current ■ ±7.5V Minimum Output Swing into 150Ω ■ 4.5V/mV Minimum DC Gai

Download LT1363CS8#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LT1363CS8#PBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - LT1363CS8#PBF
click to zoom
3D Models
LT1363CS8#PBF - Analog Devices  - 3D model - Small Outline Packages - LT1363CS8#PBF
click to zoom

LT1363CS8#PBF Details

  • Manufacturer Part Number:

    LT1363CS8#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    0.150 INCH, LEAD FREE, PLASTIC, SOP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    05-08-1610 (S8)

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    3 µA

  • Bias Current-Max (IIB) @25C:

    2 µA

  • Common-mode Reject Ratio-Min:

    76 dB

  • Common-mode Reject Ratio-Nom:

    81 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    2000 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -18 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Min:

    300 V/us

  • Slew Rate-Nom:

    450 V/us

  • Supply Current-Max:

    9 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    50000

  • Voltage Gain-Min:

    2000

  • Wideband:

    NO

  • Width:

    3.9 mm

LT1363CS8#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LT1363CS8 involves keeping the input and output traces short and wide, using a solid ground plane, and placing the input and output capacitors close to the device. Additionally, it's recommended to use a separate analog and digital ground plane to minimize noise coupling.
  • To ensure stability, it's essential to follow the recommended compensation network and component values, and to ensure that the output capacitor is properly sized and placed close to the device. Additionally, the input and output impedance should be matched to minimize ringing and oscillations.
  • The maximum power dissipation of the LT1363CS8 is dependent on the package type and the ambient temperature. The maximum power dissipation can be calculated using the formula: Pd = (Vin - Vout) x Iout. It's essential to ensure that the device does not exceed the maximum power dissipation to prevent overheating and damage.
  • The LT1363CS8 is rated for operation up to 125°C, but the device's performance and reliability may degrade at high temperatures. It's essential to consider the device's thermal characteristics and ensure proper heat sinking and cooling in high-temperature applications.
  • To protect the LT1363CS8 from overvoltage and overcurrent conditions, it's recommended to use input and output voltage clamps, and to add overcurrent protection devices such as fuses or current-limiting resistors. Additionally, it's essential to ensure that the device is operated within its recommended operating conditions.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LT1363CS8#PBF Overview

Use the download button to access the LT1363CS8#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LT136, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LT1363CS8#PBF

Showing 0 results