Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LT1496IS#PBF - Analog Devices

Description: LINEAR TECHNOLOGY - LT1496IS#PBF - Operational Amplifier, Quad, 4 Amplifier, 2.7 kHz, 0.001 V/µs, 2.2V to 36V, SOIC, 14 Pins

Download LT1496IS#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LT1496IS#PBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LT1496IS#PBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 14-Lead Plastic Small Outline (Narrow .150 Inch)
click to zoom
3D Models
LT1496IS#PBF - Analog Devices - 3D model - Small Outline Packages - 14-Lead Plastic Small Outline (Narrow .150 Inch)
click to zoom

LT1496IS#PBF Details

  • Manufacturer Part Number:

    LT1496IS#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    0.150 INCH, PLASTIC, SO-14

  • Pin Count:

    14

  • Manufacturer Package Code:

    05-08-1610 (S14)

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    CURRENT-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.0017 µA

  • Bias Current-Max (IIB) @25C:

    0.001 µA

  • Common-mode Reject Ratio-Min:

    96 dB

  • Common-mode Reject Ratio-Nom:

    114 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    675 µV

  • JESD-30 Code:

    R-PDSO-G14

  • JESD-609 Code:

    e3

  • Length:

    8.65 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -18 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    4

  • Number of Terminals:

    14

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    YES

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Min:

    0.4 V/us

  • Slew Rate-Nom:

    1 V/us

  • Supply Current-Max:

    0.012 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    2.7

  • Voltage Gain-Min:

    50000

  • Wideband:

    NO

  • Width:

    3.9 mm

LT1496IS#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LT1496IS#PBF involves separating the analog and digital grounds, using a solid ground plane, and keeping the input and output traces short and away from each other. Additionally, it's recommended to use a low-ESR capacitor for the output filter and to place the input and output capacitors close to the IC.
  • To ensure stability, make sure to follow the recommended component values and PCB layout guidelines. Additionally, ensure that the output capacitor is properly sized and that the input and output impedances are matched. It's also important to check for oscillations and ringing in the output waveform.
  • The maximum power dissipation of the LT1496IS#PBF is dependent on the package type and the ambient temperature. For the IS package, the maximum power dissipation is approximately 1.4W. To calculate the power dissipation, use the formula: Pd = (Vin - Vout) x Iout, where Vin is the input voltage, Vout is the output voltage, and Iout is the output current.
  • The LT1496IS#PBF is rated for operation up to 125°C, but the maximum junction temperature should not exceed 150°C. At high temperatures, the device's performance may degrade, and the output voltage may droop. It's essential to ensure proper heat sinking and to derate the device's power dissipation accordingly.
  • To protect the LT1496IS#PBF from input voltage transients and overvoltage conditions, use a voltage clamp or a transient voltage suppressor (TVS) diode at the input. Additionally, consider adding a fuse or a current-limiting resistor to prevent overcurrent conditions.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LT1496IS#PBF Overview

Use the download button to access the LT1496IS#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LT149, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Suggested Parts

If you searched for LT1496IS#PBF, you might also be interested in these parts:
Part Number
LT1495CS8#TR
LT1495CS8PBF
LT1496CS
LT1496CS#PBF
LT1496CS#TRPBF
LTC1592ACG#PBF
LT1495CS8#PBF
AT91SAM7S64C-AU
5787170-7

Parts related to LT1496IS#PBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

LT1496IS#PBF Alternates

Showing results

Image Part Number Model
Part Image LT1496IS#TRPBF Analog Devices Inc

Operational Amplifier, 4 Func, 675uV Offset-Max, BIPolar, PDSO14
Part Image LT1496IS#TR Linear Technology

Operational Amplifier, 4 Func, 675uV Offset-Max, BIPolar, PDSO14
Part Image LT1496IS#PBF Linear Technology

Operational Amplifier, 4 Func, 675uV Offset-Max, BIPolar, PDSO14
Part Image LT1496IS#TRPBF Linear Technology

Operational Amplifier, 4 Func, 675uV Offset-Max, BIPolar, PDSO14
Part Image LT1496IS Linear Technology

Operational Amplifier, 4 Func, 675uV Offset-Max, BIPolar, PDSO14
For a full list of alternate parts for LT1496IS#PBF, check out Findchips.com