Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LT1638CMS8#PBF - Analog Devices

Description: Precision Amplifiers Dual uP 1MHz R-to-R Op Amp

Download LT1638CMS8#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LT1638CMS8#PBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LT1638CMS8#PBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - MSOP8
click to zoom
3D Models
LT1638CMS8#PBF - Analog Devices - 3D model - Small Outline Packages - MSOP8
click to zoom

LT1638CMS8#PBF Details

  • Manufacturer Part Number:

    LT1638CMS8#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    LEAD FREE, PLASTIC, MSOP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    05-08-1660

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.05 µA

  • Common-mode Reject Ratio-Min:

    80 dB

  • Common-mode Reject Ratio-Nom:

    88 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    1500 µV

  • JESD-30 Code:

    S-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -22 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    2

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Slew Rate-Min:

    0.225 V/us

  • Slew Rate-Nom:

    0.4 V/us

  • Supply Current-Max:

    0.7 mA

  • Supply Voltage Limit-Max:

    44 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    1200

  • Voltage Gain-Min:

    200000

  • Wideband:

    NO

  • Width:

    3 mm

LT1638CMS8#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LT1638 involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing the input and output capacitors close to the device. A 4-layer PCB with a dedicated ground plane is recommended.
  • To ensure stability in high-gain configurations, it's essential to use a compensation capacitor (Cc) between the output and the inverting input. The value of Cc depends on the gain and bandwidth requirements. A good starting point is to use a 10pF to 22pF capacitor.
  • The maximum power dissipation of the LT1638 is dependent on the package type and ambient temperature. For the MS8 package, the maximum power dissipation is 1.4W. To calculate the power dissipation, use the formula: Pd = (Vcc x Icc) + (Vout x Iout), where Vcc is the supply voltage, Icc is the quiescent current, Vout is the output voltage, and Iout is the output current.
  • Yes, the LT1638 can be used as a unity-gain buffer. However, it's essential to ensure that the input impedance is high enough to avoid loading the input signal. A good practice is to add a series resistor (Rs) between the input and the inverting input to improve the input impedance. The value of Rs depends on the input signal amplitude and frequency.
  • To protect the LT1638 from overvoltage and ESD damage, use a voltage clamp or a transient voltage suppressor (TVS) diode at the input. Additionally, ensure that the PCB design includes adequate ESD protection measures, such as ESD diodes and resistors, to prevent damage from electrostatic discharge.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LT1638CMS8#PBF Overview

Use the download button to access the LT1638CMS8#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LT163, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LT1638CMS8#PBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

LT1638CMS8#PBF Alternates

Showing results

Image Part Number Model
Part Image LT1638CMS8#TRPBF Analog Devices Inc

Operational Amplifier, 2 Func, 1500uV Offset-Max, BIPolar, PDSO8
Part Image LT1638IMS8#TRPBF Analog Devices Inc

Operational Amplifier, 1 Func, 1500uV Offset-Max, BIPolar, PDSO8
Part Image LT1638IMS8#TR Linear Technology

Operational Amplifier, 2 Func, 1250uV Offset-Max, BIPolar, PDSO8
Part Image LT1638IMS8#TRPBF Linear Technology

Operational Amplifier, 1 Func, 1500uV Offset-Max, BIPolar, PDSO8