Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LT3007ETS8-2.5#TRMPBF - Analog Devices

Description: LDO Voltage Regulators 3uA IQ, 20mA, 45V L Drop Fault Tolerant

Download LT3007ETS8-2.5#TRMPBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LT3007ETS8-2.5#TRMPBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LT3007ETS8-2.5#TRMPBF - Analog Devices PCB footprint - SOT23 (8-Pin) - SOT23 (8-Pin) - TS8 Package 8-Lead Plastic TSOT-23
click to zoom
3D Models
LT3007ETS8-2.5#TRMPBF - Analog Devices - 3D model - SOT23 (8-Pin) - TS8 Package 8-Lead Plastic TSOT-23
click to zoom

LT3007ETS8-2.5#TRMPBF Details

  • Manufacturer Part Number:

    LT3007ETS8-2.5#TRMPBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    TSOT-23, 8 PIN

  • Pin Count:

    8

  • Manufacturer Package Code:

    05-08-1637

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Adjustability:

    FIXED

  • Dropout Voltage1-Max:

    0.5 V

  • Dropout Voltage1-Nom:

    0.3 V

  • Input Voltage Absolute-Max:

    50 V

  • Input Voltage-Max:

    45 V

  • Input Voltage-Min:

    3.05 V

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    2.9 mm

  • Line Regulation-Max:

    0.0125%

  • Load Regulation-Max(%):

    0.021%

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    8

  • Operating Temperature TJ-Max:

    125 °C

  • Operating Temperature TJ-Min:

    -40 °C

  • Output Current1-Max:

    0.02 A

  • Output Voltage1-Max:

    2.55 V

  • Output Voltage1-Min:

    2.45 V

  • Output Voltage1-Nom:

    2.5 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    VSSOP

  • Package Equivalence Code:

    TSSOP8,.1

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Qualification Status:

    Not Qualified

  • Regulator Type:

    FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR

  • Seated Height-Max:

    1 mm

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Voltage Tolerance-Max:

    2%

  • Width:

    1.625 mm

LT3007ETS8-2.5#TRMPBF Frequently Asked Questions (FAQs)

  • A good PCB layout for optimal thermal performance involves placing the device on a solid copper plane, using thermal vias to connect the plane to the device's thermal pad, and keeping the plane as close to the device as possible. Additionally, it's recommended to use a 4-layer PCB with a dedicated thermal layer to improve heat dissipation.
  • To ensure the device is properly biased, make sure to follow the recommended biasing scheme outlined in the datasheet. This typically involves connecting the VIN pin to a suitable voltage source, and the EN pin to a logic-level signal. Additionally, ensure that the input and output capacitors are properly selected and placed close to the device to minimize noise and oscillations.
  • Operating the device beyond the recommended operating temperature range can lead to reduced performance, decreased efficiency, and potentially even damage to the device. It's essential to ensure that the device is operated within the recommended temperature range to maintain its specifications and reliability.
  • To troubleshoot issues with the device, start by verifying that the device is properly biased and that the input and output capacitors are properly selected and placed. Check for any signs of oscillations or instability, such as excessive noise or voltage ripple. Use an oscilloscope to monitor the device's output and input signals, and consult the datasheet and application notes for guidance on troubleshooting common issues.
  • Using a different inductor value or type than recommended can affect the device's performance, efficiency, and stability. It's essential to select an inductor that meets the recommended specifications to ensure optimal performance. Using a different inductor value or type may require adjustments to the device's compensation network or other components to maintain stability and performance.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LT3007ETS8-2.5#TRMPBF Overview

Use the download button to access the LT3007ETS8-2.5#TRMPBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LT300, or try a keyword search, such as Linear Regulator ICs

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LT3007ETS8-2.5#TRMPBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑