Part Image

LT8491EUKJ#TRPBF - Analog Devices

Description: High Voltage Buck-Boost Battery Charge?Controller with Maximum Power Point?Tracking (MPPT) and I2C

Download LT8491EUKJ#TRPBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LT8491EUKJ#TRPBF - Analog Devices PCB footprint - Other - Other - UKJ Package Variation: UKJ64(58) 64(58)-Lead Plastic QFN (7mm × 11mm)
click to zoom
3D Models
LT8491EUKJ#TRPBF - Analog Devices  - 3D model - Other - UKJ Package Variation: UKJ64(58) 64(58)-Lead Plastic QFN (7mm × 11mm)
click to zoom

LT8491EUKJ#TRPBF Details

  • Manufacturer Part Number:

    LT8491EUKJ#TRPBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    QFN-64/58

  • Pin Count:

    64

  • Manufacturer Package Code:

    05-08-1922

  • Country Of Origin:

    Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Date Of Intro:

    2020-01-10

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SWITCHING CONTROLLER

  • Control Mode:

    VOLTAGE-MODE

  • Control Technique:

    PULSE WIDTH MODULATION

  • Input Voltage-Max:

    80 V

  • Input Voltage-Min:

    6 V

  • Input Voltage-Nom:

    12 V

  • JESD-30 Code:

    R-PQCC-N58

  • JESD-609 Code:

    e3

  • Length:

    11 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    58

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Voltage-Max:

    80 V

  • Output Voltage-Min:

    1.3 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC58/64,.27X.43,20

  • Package Shape:

    RECTANGULAR

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    0.8 mm

  • Supply Voltage-Nom (Vsup):

    3.3 V

  • Surface Mount:

    YES

  • Switcher Configuration:

    BUCK-BOOST

  • Switching Frequency-Max:

    400 kHz

  • Technology:

    BIPOLAR

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7 mm

LT8491EUKJ#TRPBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LT8491 involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a separate analog ground plane and to keep the analog and digital grounds separate.
  • The choice of input and output capacitors for the LT8491 depends on the specific application requirements. In general, low-ESR capacitors with a high ripple current rating are recommended. The input capacitor should be able to handle the input voltage and current, while the output capacitor should be able to handle the output voltage and current. A good starting point is to use capacitors with a capacitance value of 10uF to 22uF and a voltage rating of 1.5 to 2 times the input voltage.
  • The LT8491 is rated for operation over a temperature range of -40°C to 125°C. However, the device's performance and reliability may be affected at extreme temperatures. It's recommended to derate the device's performance and ensure proper thermal management to ensure reliable operation over the desired temperature range.
  • To ensure the LT8491 is stable and doesn't oscillate, it's recommended to follow the layout guidelines, use the recommended capacitors, and ensure that the input and output voltages are within the specified range. Additionally, the device's compensation pin can be used to adjust the loop compensation and ensure stability. It's also recommended to simulate the design using a SPICE model and to test the device in a prototype before mass production.
  • The typical efficiency of the LT8491 depends on the input and output voltages, as well as the load current. According to the datasheet, the device can achieve an efficiency of up to 95% at a 12V input and 5V output with a 1A load current. However, the actual efficiency may vary depending on the specific application and operating conditions.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LT8491EUKJ#TRPBF Overview

Use the download button to access the LT8491EUKJ#TRPBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LT849, or try a keyword search, such as Switching Regulator or Controllers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LT8491EUKJ#TRPBF

Showing 0 results

LT8491EUKJ#TRPBF Alternates

Showing results

Image Part Number Model
Part Image LT8491IUKJ#PBF Analog Devices Inc

Switching Controller, Voltage-mode, 400kHz Switching Freq-Max, BIPolar, PQCC58

Part Image LT8491IUKJ#TRPBF Analog Devices Inc

Switching Controller, Voltage-mode, 400kHz Switching Freq-Max, BIPolar, PQCC58