Part Image

LTC1992-2CMS8#PBF - Analog Devices

Description: Linear Technology LTC1992-2CMS8#PBF, Differential Amplifier 3.2MHz Rail to Rail Output 8-Pin MSOP

Download LTC1992-2CMS8#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LTC1992-2CMS8#PBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - MS8 8-Lead Plastic MSOP
click to zoom
3D Models
LTC1992-2CMS8#PBF - Analog Devices  - 3D model - Small Outline Packages - MS8 8-Lead Plastic MSOP
click to zoom

LTC1992-2CMS8#PBF Details

  • Manufacturer Part Number:

    LTC1992-2CMS8#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    LEAD FREE, PLASTIC, MSOP-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    05-08-1660

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.000002 µA

  • Common-mode Reject Ratio-Min:

    55 dB

  • Common-mode Reject Ratio-Nom:

    60 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    2500 µV

  • JESD-30 Code:

    S-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP8,.19

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Slew Rate-Nom:

    2 V/us

  • Supply Current-Max:

    1.5 mA

  • Supply Voltage Limit-Max:

    12 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    4000

  • Wideband:

    NO

  • Width:

    3 mm

LTC1992-2CMS8#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LTC1992-2 involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing the device close to the analog power supply. A 4-layer PCB with a dedicated analog ground plane is recommended.
  • To ensure stability, make sure to follow the recommended component values and PCB layout guidelines. Also, ensure that the input and output capacitors are of high quality and have low ESR. Additionally, a small series resistor (e.g., 10Ω) can be added between the output and the feedback pin to improve stability.
  • The maximum power dissipation of the LTC1992-2 is dependent on the package type and ambient temperature. For the CMS8 package, the maximum power dissipation is approximately 1.4W at 25°C ambient temperature. However, it's recommended to derate the power dissipation based on the ambient temperature and desired reliability.
  • While the LTC1992-2 can be used as a voltage regulator, it's not the most suitable application for this device. The LTC1992-2 is primarily designed as a low-noise, low-dropout linear regulator, and its performance may not be optimal for voltage regulation applications. For voltage regulation, it's recommended to use a dedicated voltage regulator IC.
  • The output voltage of the LTC1992-2 can be calculated using the following formula: VOUT = VREF × (1 + R1/R2), where VREF is the internal reference voltage (1.2V), and R1 and R2 are the feedback resistors. The output voltage range is from 1.2V to 5.5V.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC1992-2CMS8#PBF Overview

Use the download button to access the LTC1992-2CMS8#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC19, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC1992-2CMS8#PBF

Showing 0 results

LTC1992-2CMS8#PBF Alternates

Showing results

Image Part Number Model
Part Image LTC1992-2IMS8#TRPBF Analog Devices Inc

Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO8

Part Image LTC1992-2IMS8#PBF Linear Technology

Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO8

Part Image LTC1992-2CMS8#TR Linear Technology

Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO8

Part Image LTC1992-2CMS8#TRPBF Linear Technology

Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO8

Part Image LTC1992-2IMS8#TR Analog Devices Inc

Operational Amplifier, 1 Func, 2500uV Offset-Max, CMOS, PDSO8

For a full list of alternate parts for LTC1992-2CMS8#PBF, check out Findchips.com