LTL2R3KYD-EM footprint, schematic symbol and 3D model by Lite-On

Symbol

PCB Footprints

3D Models

LTL2R3KYD-EM Details

A 2-layer or 4-layer PCB with a solid ground plane and thermal vias is recommended. Keep the driver IC away from heat sources and ensure good airflow.
Connect a sense resistor (Rs) between the output and GND. Rs should be 1% accurate and have a low temperature coefficient. The OCP threshold is 1.5A typical.
Use a low-ESR, X5R or X7R ceramic capacitor with a value of 4.7uF to 10uF. This ensures stable input voltage and reduces noise.
Use a resistor (Rset) between the SET pin and GND. The output current (Iout) is calculated as Iout = 0.1V / Rset. Choose Rset to achieve the desired output current.
The LTL2R3KYD-EM is rated for operation up to 85°C ambient temperature. Ensure good airflow and heat sinking to maintain a safe junction temperature.

Expert Contribution

System Verified

Community Approved

Use the download button to access the LTL2R3KYD-EM schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like LTL2R, or try a keyword search, such as Visible LEDs

If you searched for LTL2R3KYD-EM, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →