The recommended operating temperature range for the LTR-390UV-01 is -40°C to 85°C.
To minimize the effect of ambient light, use a UV filter or a UV-pass filter to block visible and infrared light. You can also use a mechanical shutter or a light shield to block ambient light.
The recommended power-up sequence is to apply VCC first, followed by EN (enable) and then SCL (clock) and SDA (data) for I2C communication.
Calibration involves adjusting the sensor's sensitivity to match the specific application's requirements. This can be done by adjusting the gain setting or using an external calibration circuit.
The maximum allowable voltage on the EN (enable) pin is VCC + 0.3V, but it's recommended to keep it within VCC to ensure proper operation.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
LTR-390UV-01 Overview
Use the download button to access the LTR-390UV-01 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTR-3,
or try a keyword search, such as Other Sensors/Transducers
Suggested Parts
If you searched for LTR-390UV-01, you might also be interested in these parts: