Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LTR1-01 - Nidec Copal

Description: SWITCH PUSH SPST-NO 10MA 12V

Download LTR1-01 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LTR1-01 - Nidec Copal - PCB symbol
click to zoom
PCB Footprints
LTR1-01 - Nidec Copal PCB footprint - Other - Other - LTR1-01-6
click to zoom
3D Models
LTR1-01 - Nidec Copal - 3D model - Other - LTR1-01-6
click to zoom

LTR1-01 Details

  • Manufacturer Part Number:

    LTR1-01

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • ECCN Code:

    EAR99

  • HTS Code:

    8536.50.90.31

  • Manufacturer:

    Nidec Copal Electronics Corporation

  • YTEOL:

    8.2

  • Actuator Length:

    0.098 inch

  • Actuator Travel:

    0.9906 mm

  • Actuator Type:

    PUSHBUTTON

  • Body Breadth:

    5.9944 mm

  • Body Height:

    6.5024 mm

  • Body Length or Diameter:

    7.0104 mm

  • Center Contact Plating:

    GOLD

  • Contact Current(DC)-Max:

    0.01 A

  • Contact (DC) Max Rating R Load:

    0.01A@12VDC

  • Contact Function:

    OFF-(ON)

  • Contact Resistance:

    500 mΩ

  • Contact Timing:

    BREAK-BEFORE-MAKE

  • Contact Voltage(DC)-Max:

    12 V

  • Dielectric Withstand Volts:

    250VAC V

  • Electrical Life:

    100000 Cycle(s)

  • End Contact Plating:

    GOLD

  • Insulation Resistance:

    100000000 Ω

  • JESD-609 Code:

    e4

  • Mounting Feature:

    THROUGH HOLE-STRAIGHT

  • Operating Temperature-Max:

    70 °C

  • Operating Temperature-Min:

    -25 °C

  • PCB Hole Count:

    5

  • Solderability:

    HAND

  • Surface Mount:

    NO

  • Switch Action:

    MOMENTARY

  • Switch Function:

    SPST

  • Switch Type:

    MINIATURE SWITCH

  • Terminal Finish:

    Gold (Au)

  • Terminal Length:

    0.138 inch

  • Termination Type:

    SOLDER

  • Washability:

    SOLVENT

LTR1-01 Frequently Asked Questions (FAQs)

  • A recommended PCB layout is to place the LTR1-01 near the power source, use a solid ground plane, and keep the input and output traces separate to minimize noise and EMI.
  • To ensure reliability, follow the recommended operating temperature range, use a heat sink if necessary, and ensure good airflow around the device. Also, consider derating the output current and voltage according to the temperature derating curve.
  • The maximum allowable ripple current for the LTR1-01 is not explicitly stated in the datasheet, but as a general rule, it's recommended to keep the ripple current below 30% of the maximum output current to ensure stable operation.
  • Yes, the LTR1-01 can be used in a parallel configuration to increase the output current, but it's essential to ensure that the output voltages are matched and the input currents are balanced to avoid uneven current sharing.
  • The recommended input capacitor type is a low-ESR ceramic capacitor, and the value should be at least 10uF to ensure stable operation and minimize input voltage ripple.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTR1-01 Overview

Use the download button to access the LTR1-01 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTR1-, or try a keyword search, such as Other Switches

Parts related to LTR1-01

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑