LTR18EZPFLR100 footprint, schematic symbol and 3D model by ROHM Semiconductor

Symbol

PCB Footprints

3D Models

LTR18EZPFLR100 Details

A recommended PCB layout for optimal thermal performance would be to have a large copper area on the bottom layer of the PCB, connected to the thermal pad of the LTR18EZPFLR100. This helps to dissipate heat efficiently.
To ensure the stability of the output voltage, it is recommended to use a capacitor with a low ESR (Equivalent Series Resistance) and a high ripple current rating. Additionally, the output capacitor should be placed as close to the output pin of the LTR18EZPFLR100 as possible.
The maximum input voltage that can be applied to the LTR18EZPFLR100 is 36V. Exceeding this voltage may damage the device.
To protect the LTR18EZPFLR100 from overcurrent, a current limiting resistor can be added in series with the input voltage. Additionally, a fuse or a PTC (Positive Temperature Coefficient) thermistor can be used to limit the current in case of an overload.
The recommended input capacitor value is 1uF to 10uF, and the type should be a ceramic capacitor with a voltage rating of at least 50V. The capacitor should be placed as close to the input pin of the LTR18EZPFLR100 as possible.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the LTR18EZPFLR100 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like LTR18, or try a keyword search, such as Fixed Resistors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →