MACOM recommends a 4-layer PCB with a solid ground plane, and thermal vias under the package to dissipate heat. A thermal pad on the bottom of the package should be connected to a heat sink or a thermal management system.
The device requires a bias tee or a DC block to provide the correct voltage and current. A bias voltage of 5V and a current of 350mA is recommended. The bias circuit should be designed to provide a low impedance path to ground.
MACOM recommends using a conjugate match at the input and output ports to achieve optimal performance. A series inductor and shunt capacitor can be used to match the input and output impedance to 50 ohms.
The device is sensitive to ESD, so proper handling and storage procedures should be followed. Anti-static wrist straps, mats, and packaging should be used to prevent ESD damage.
The recommended operating temperature range for the MA4P1250NM-1072T is -40°C to 85°C. Operating the device outside of this range may affect its performance and reliability.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MA4P1250NM-1072T Overview
Use the download button to access the MA4P1250NM-1072T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MA4P1,
or try a keyword search, such as PIN Diodes
