MACOM recommends a 4-layer PCB with a solid ground plane, and thermal vias under the package to dissipate heat. A thermal pad on the bottom of the package should be connected to a thermal plane on the PCB.
The device requires a bias tee or a DC block to provide the necessary voltage and current. A bias voltage of 5V to 12V is recommended, and the current limit should be set to 100mA to 200mA.
The recommended RF input power range for MABA-007681-CT2010 is -20 dBm to 10 dBm. Exceeding this range may result in reduced performance or damage to the device.
Check the PCB layout for any parasitic inductances or capacitances that may be causing oscillations. Ensure the device is properly biased and the input/output impedances are matched. Also, verify that the device is operated within the recommended temperature range.
Store the device in a dry, cool place, away from direct sunlight and moisture. Handle the device by the package, avoiding touching the pins or die. Use an anti-static wrist strap or mat when handling the device to prevent ESD damage.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MABA-007681-CT2010 Overview
Use the download button to access the MABA-007681-CT2010 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MABA-,
or try a keyword search, such as RF Transformers
