MABA-010441-CT38A0 footprint, schematic symbol and 3D model by MACOM

Symbol

PCB Footprints

3D Models

MABA-010441-CT38A0 Details

MACOM recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A thermal pad on the bottom of the package should be connected to a heat sink or a thermal management system.
MACOM provides a recommended PCB layout and impedance matching circuit in the application note. Additionally, engineers can use simulation tools like ADS or AWR to optimize the impedance matching network for their specific application.
While the datasheet specifies an operating temperature range of -40°C to 85°C, MACOM recommends derating the device's power dissipation above 70°C to ensure reliable operation and prevent thermal runaway.
Yes, the MABA-010441-CT38A0 can be used in a push-pull configuration, but MACOM recommends using a balun or a transformer to ensure proper impedance matching and to prevent uneven current distribution between the two devices.
MACOM recommends a voltage-controlled biasing scheme, where the gate voltage is set to around 2.5V to 3.5V, and the drain voltage is set to around 12V to 15V, depending on the specific application requirements.

Expert Contribution

System Verified

Community Approved

Use the download button to access the MABA-010441-CT38A0 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like MABA-, or try a keyword search, such as RF Transformers

If you searched for MABA-010441-CT38A0, you might also be interested in these parts:

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →