The recommended PCB layout for the MAC15MG involves keeping the device away from high-current carrying traces, using a solid ground plane, and minimizing the length of the leads to reduce inductance. A 4-layer PCB with a dedicated ground plane is recommended.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder to the leads. Avoid applying excessive force or pressure, which can damage the device. Use a soldering technique that minimizes the time the iron is in contact with the leads.
The MAC15MG can withstand surge currents up to 1500A, 8/20μs waveform, as per the IEC 61000-4-5 standard. However, it's essential to note that the device's surge current capability may be affected by the PCB layout, trace impedance, and other system-level factors.
The MAC15MG is rated for operation up to 125°C, but its performance may degrade at higher temperatures. If your application requires operation above 125°C, consult with Littelfuse Inc or a qualified engineer to determine the suitability of the device for your specific use case.
Select a fuse holder or clip that is specifically designed for the MAC15MG's physical dimensions and current rating. Ensure the holder or clip provides good electrical contact and is rated for the maximum current and voltage of your application. Consult the datasheet or manufacturer's recommendations for guidance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MAC15MG Overview
Use the download button to access the MAC15MG schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAC15,
or try a keyword search, such as TRIACs
