MAVR-000403-0287AT footprint, schematic symbol and 3D model by MACOM

Symbol

PCB Footprints

3D Models

MAVR-000403-0287AT Details

MACOM recommends a 4-layer PCB with a solid ground plane, and thermal vias under the device to dissipate heat. A thermal pad on the bottom of the package should be connected to a thermal plane on the PCB.
The device requires a bias tee or a DC block to provide the necessary DC voltage and current. A bias voltage of 5V to 12V is recommended, and the current limit should be set to 100mA to 200mA.
MACOM recommends using a pi-network or a T-network for input and output matching. The specific component values will depend on the operating frequency and desired impedance.
The device is sensitive to ESD, so proper handling and storage procedures should be followed. Use an ESD wrist strap or mat, and store the device in an anti-static bag or container.
The recommended operating temperature range is -40°C to 85°C. However, the device can operate up to 100°C with reduced performance and reliability.

Community Provided

System Verified

Community Approved

Use the download button to access the MAVR-000403-0287AT schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like MAVR-, or try a keyword search, such as Varactors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →