Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAW01-05S05 - Minmax

Description: The MAW01 series is a range of isolated 1W DC-DC-converter modules featuring fully regulated output and wide 2:1 input voltage ranges. This product comes in a very small SIP-6 package occupying only 0.2 square inch on the PCB. A high efficiency allow operating an operating temperature range of -40℃ to +85℃ without Derating.

Download MAW01-05S05 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAW01-05S05 - Minmax - PCB symbol
click to zoom
PCB Footprints
MAW01-05S05 - Minmax PCB footprint - Other - Other - MAW01-05S05-2
click to zoom
3D Models
MAW01-05S05 - Minmax - 3D model - Other - MAW01-05S05-2
click to zoom

MAW01-05S05 Details

  • Manufacturer Part Number:

    MAW01-05S05

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SIP-6/4

  • ECCN Code:

    EAR99

  • Manufacturer:

    Minmax Technology Co Ltd

  • YTEOL:

    5

  • Analog IC - Other Type:

    DC-DC REGULATED POWER SUPPLY MODULE

  • Approvals:

    CB, CSA, CUL, EN, IEC, UL

  • Efficiency (Main Output):

    76%

  • Input Voltage-Max:

    9 V

  • Input Voltage-Min:

    4.5 V

  • Input Voltage-Nom:

    5 V

  • JESD-30 Code:

    R-PSIP-T4

  • Length:

    17 mm

  • Line Regulation-Max:

    0.2%

  • Load Regulation-Max:

    1%

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    4

  • Operating Temperature-Max:

    95 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Current-Max:

    0.2 A

  • Output Voltage-Max:

    5.05 V

  • Output Voltage-Min:

    4.95 V

  • Output Voltage-Nom:

    5 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SIP

  • Package Equivalence Code:

    SIP4/6,.1

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Protections:

    OVER LOAD, SHORT CIRCUIT

  • Ripple Voltage (Main Out):

    0.038885 Vrms

  • Screening Level:

    EN/IEC/UL 62368-1

  • Seated Height-Max:

    11.5 mm

  • Surface Mount:

    NO

  • Technology:

    HYBRID

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    SINGLE

  • Total Power Output-Max:

    1 W

  • Trim/Adjustable Output:

    NO

  • Width:

    7.62 mm

MAW01-05S05 Frequently Asked Questions (FAQs)

  • The recommended PCB layout involves keeping the input and output traces separate, using a solid ground plane, and placing the input capacitors close to the device. For thermal management, a heat sink or thermal pad is recommended to keep the junction temperature below 125°C.
  • The MAW01-05S05 has built-in overvoltage protection and undervoltage lockout, which helps to protect the device during input voltage transients or brownouts. However, it's still recommended to add external protection circuits if the input voltage is expected to exceed the maximum rating.
  • The maximum allowable ripple current for the input capacitors depends on the capacitor type and rating. As a general rule, the ripple current should be limited to 20-30% of the capacitor's rated current to ensure reliability and longevity.
  • Yes, the MAW01-05S05 can be used in high-temperature environments, but the output power should be derated according to the temperature derating curve provided in the datasheet. Typically, the output power should be reduced by 1-2% per degree Celsius above 50°C.
  • The recommended input capacitor type is a low-ESR ceramic capacitor with a value of 10-22uF. The capacitor should be rated for the maximum input voltage and have a low equivalent series resistance (ESR) to minimize voltage ripple and ensure stable operation.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAW01-05S05 Overview

Use the download button to access the MAW01-05S05 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAW01, or try a keyword search, such as Power Supply Modules

Parts related to MAW01-05S05

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑