Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX12930CASA+ - Analog Devices

Description: Digital Isolators 2-Channel, 3.75kVRMS Digital Isolators

Download MAX12930CASA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX12930CASA+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX12930CASA+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8 SO-3
click to zoom
3D Models
MAX12930CASA+ - Analog Devices - 3D model - Small Outline Packages - 8 SO-3
click to zoom

MAX12930CASA+ Details

  • Manufacturer Part Number:

    MAX12930CASA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.01

  • Date Of Intro:

    2016-09-19

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Interface IC Type:

    DIGITAL ISOLATOR

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    1.75 mm

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    1.71 V

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

MAX12930CASA+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX12930CASA+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing noise coupling between the analog and digital sections. A 4-layer PCB with a dedicated analog ground plane is recommended. Additionally, place the device close to the analog signal sources and keep the analog signal traces short and shielded.
  • To optimize the performance of the MAX12930CASA+ in a noisy environment, use a low-pass filter on the analog input signals, use a shielded enclosure, and keep the device away from high-frequency noise sources. Additionally, use a common-mode choke on the power supply lines and decouple the power supply with a 10uF capacitor.
  • The maximum clock frequency that can be used with the MAX12930CASA+ is 50MHz. However, the actual clock frequency used may be limited by the specific application and the noise environment.
  • The MAX12930CASA+ can be programmed using the SPI interface. The device has a set of registers that can be written to configure the device for a specific application. The programming sequence involves writing to the control registers, configuring the analog-to-digital converter (ADC), and setting the output format. Refer to the datasheet and the application notes for specific programming examples.
  • The power consumption of the MAX12930CASA+ depends on the specific application and the clock frequency used. Typically, the device consumes around 20mA of current at a 3.3V supply voltage and a 10MHz clock frequency. However, the actual power consumption may be higher or lower depending on the specific use case.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX12930CASA+ Overview

Use the download button to access the MAX12930CASA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX12, or try a keyword search, such as Other Interface ICs

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX12930CASA+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑