Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX2679ENS+T - Analog Devices

Description: ● High Power Gain: 19dB (MAX2679), 16.5dB (MAX2679B) ● Low Noise Figure: 0.95dB (MAX2679), 1.03dB (MAX2679B) ● Integrated 50Ω Output Matching Circuit ● Low Supply Current: 1mA (MAX2679), 650μA (MAX2679B) ● Wide Supply Voltage Range: 1.08V to 1.98V ● Low Bill of Materials: One Inductor, Two Capacitors, One Resistor ● 4-Bump, 0.4mm Pitch WLP, 0.83mm x 0.83mm

Download MAX2679ENS+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX2679ENS+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX2679ENS+T - Analog Devices PCB footprint - BGA - BGA - N40D0+1
click to zoom
3D Models
MAX2679ENS+T - Analog Devices - 3D model - BGA - N40D0+1
click to zoom

MAX2679ENS+T Details

  • Manufacturer Part Number:

    MAX2679ENS+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    4-WLCSP-N/A

  • Pin Count:

    4

  • Manufacturer Package Code:

    4-WLCSP-N/A

  • Date Of Intro:

    2017-06-16

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Characteristic Impedance:

    50 Ω

  • Construction:

    COMPONENT

  • Gain:

    19 dB

  • Input Power-Max (CW):

    5 dBm

  • Mounting Feature:

    SURFACE MOUNT

  • Number of Functions:

    1

  • Number of Terminals:

    4

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Equivalence Code:

    BGA4,2X2,16

  • Power Supplies:

    1.8 V

  • RF/Microwave Device Type:

    LOW NOISE AMPLIFIER

  • Surface Mount:

    YES

  • Terminal Finish:

    Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni)

  • VSWR-Max:

    1.67

MAX2679ENS+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX2679ENS+T involves keeping the input and output traces short and separate, using a solid ground plane, and placing the input and output capacitors close to the device. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and EMI.
  • The choice of input and output capacitors for the MAX2679ENS+T depends on the specific application requirements. In general, X5R or X7R ceramic capacitors with a voltage rating of 10V or higher are recommended. The capacitance value should be chosen based on the desired output voltage ripple and the input voltage range. A good starting point is to use 10uF capacitors for both input and output.
  • The MAX2679ENS+T has an operating temperature range of -40°C to +125°C. However, the maximum ambient temperature range depends on the specific application and the thermal design of the system. In general, it's recommended to keep the ambient temperature below 85°C to ensure reliable operation.
  • To ensure stability and prevent oscillation, it's essential to follow the recommended PCB layout and component selection guidelines. Additionally, make sure to use a sufficient output capacitor value and a low-ESR capacitor to minimize output voltage ripple. It's also recommended to add a small ceramic capacitor (e.g., 10nF) between the VIN pin and GND to filter out high-frequency noise.
  • Yes, the MAX2679ENS+T is suitable for high-reliability and automotive applications. It's AEC-Q100 qualified and meets the requirements for automotive systems. However, it's essential to follow the recommended design and layout guidelines, and to perform thorough testing and validation to ensure the device meets the specific application requirements.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX2679ENS+T Overview

Use the download button to access the MAX2679ENS+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX26, or try a keyword search, such as RF/Microwave Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Suggested Parts

If you searched for MAX2679ENS+T, you might also be interested in these parts:
Part Number
LFXTAL050789
Q22FA1280009218
SKY13588-460LF
LR1110IMLTRT
0900LP15B0063E
B39921B4344P810
BGA524N6E6327XTSA1
DPX162500DT-8028A1
SAFFB1G56KB0F5F

Parts related to MAX2679ENS+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑