Part Image

MAX306CWI+T - Analog Devices

Description: Multiplexer Switch ICs Precision, 16-Channel/Dual 8-Channel, High-Performance, CMOS Analog Multiplexers

Download MAX306CWI+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX306CWI+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - W28+6
click to zoom
3D Models
MAX306CWI+T - Analog Devices  - 3D model - Small Outline Packages - W28+6
click to zoom

MAX306CWI+T Details

  • Manufacturer Part Number:

    MAX306CWI+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    28-SOIC_W-300_MIL

  • Package Description:

    SOP, SOP28,.4

  • Pin Count:

    28

  • Manufacturer Package Code:

    28-SOIC_W-300_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1994-08-12

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SINGLE-ENDED MULTIPLEXER

  • JESD-30 Code:

    R-PDSO-G28

  • JESD-609 Code:

    e3

  • Length:

    17.9 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -4.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NO

  • Number of Channels:

    16

  • Number of Functions:

    1

  • Number of Terminals:

    28

  • Off-state Isolation-Nom:

    69 dB

  • On-state Resistance Match-Nom:

    1.5 Ω

  • On-state Resistance-Max (Ron):

    100 Ω

  • Operating Temperature-Max:

    70 °C

  • Output:

    COMMON OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP28,.4

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    2.65 mm

  • Signal Current-Max:

    0.03 A

  • Supply Current-Max (Isup):

    1 mA

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    4.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    150 ns

  • Switch-on Time-Max:

    200 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7.5 mm

MAX306CWI+T Frequently Asked Questions (FAQs)

  • A good PCB layout practice for the MAX306CWI+T is to keep the analog and digital grounds separate, use a solid ground plane, and keep the signal traces short and away from noise sources. Additionally, use a common-mode filter or a ferrite bead to filter out high-frequency noise.
  • To ensure proper termination, use a 50Ω termination resistor at the receiver end for each differential pair. Also, make sure to match the impedance of the transmission line to the impedance of the receiver.
  • The maximum cable length supported by the MAX306CWI+T depends on the signal frequency and the type of cable used. As a general rule, the maximum cable length is around 10-15 meters for a signal frequency of up to 100 MHz. However, it's recommended to consult the datasheet and perform signal integrity simulations to determine the maximum cable length for a specific application.
  • The MAX306CWI+T is a flexible transceiver that can be configured for various data rates and protocols using external resistors and capacitors. Consult the datasheet and application notes for specific configuration guidelines for your desired data rate and protocol.
  • The power consumption of the MAX306CWI+T depends on the operating frequency, data rate, and supply voltage. To reduce power consumption, consider using a lower supply voltage, reducing the operating frequency, or using the device's power-down mode when not in use.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX306CWI+T Overview

Use the download button to access the MAX306CWI+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX30, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX306CWI+T

Showing 0 results

MAX306CWI+T Alternates

Showing results

Image Part Number Model
Part Image MAX306EWI+T Analog Devices Inc

Single-Ended Multiplexer, 1 Func, 16 Channel, CMOS, PDSO28

Part Image MAX306CWI Rochester Electronics LLC

16-CHANNEL, SGL ENDED MULTIPLEXER, PDSO28, SO-28

Part Image MAX306CWI+ Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 16 Channel, CMOS, PDSO28

Part Image MAX306CWI+T Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 16 Channel, CMOS, PDSO28

Part Image MAX306EWI-T Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 16 Channel, CMOS, PDSO28, SO-28

For a full list of alternate parts for MAX306CWI+T, check out Findchips.com