Part Image

MAX31820PARMCR+T - Analog Devices

Description: Board Mount Temperature Sensors AMBIENT TEMP SENSOR PARA POWER T&R -55C-125C TO92-3

Download MAX31820PARMCR+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX31820PARMCR+T - Analog Devices PCB footprint - Other - Other - Q3+4-2025_1
click to zoom

MAX31820PARMCR+T Details

  • Manufacturer Part Number:

    MAX31820PARMCR+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    3-TO92-N/A

  • Package Description:

    ROHS COMPLIANT, TO-92, 3 PIN

  • Pin Count:

    3

  • Manufacturer Package Code:

    3-TO92-N/A

  • Similar Group:

    SE061008YYYY1112

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • Date Of Intro:

    2013-06-28

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Accuracy-Max (Cel):

    2 Cel

  • Body Breadth:

    3.62 mm

  • Body Height:

    4.635 mm

  • Body Length or Diameter:

    4.7 mm

  • Housing:

    PLASTIC

  • JESD-609 Code:

    e3

  • Mounting Feature:

    THROUGH HOLE MOUNT

  • Number of Bits:

    12

  • Number of Terminals:

    3

  • Operating Current-Max:

    1.5 mA

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -55 °C

  • Output Interface Type:

    1-WIRE INTERFACE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Equivalence Code:

    SIP3,.1,50

  • Package Shape/Style:

    OVAL

  • Packing Method:

    TR

  • Sensors/Transducers Type:

    TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL

  • Supply Voltage-Max:

    3.7 V

  • Supply Voltage-Min:

    3 V

  • Surface Mount:

    NO

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Termination Type:

    SOLDER

MAX31820PARMCR+T Frequently Asked Questions (FAQs)

  • A good PCB layout is crucial for accurate temperature measurements. It is recommended to keep the MAX31820PARMCR+T away from heat sources, use a solid ground plane, and keep the thermocouple wires as short as possible. Additionally, it is recommended to use a 4-layer PCB with a dedicated ground plane and to route the thermocouple wires on a separate layer to minimize noise and interference.
  • The MAX31820PARMCR+T does not require calibration for temperature measurements. However, it is recommended to perform a cold-junction compensation (CJC) calibration to improve the accuracy of the temperature measurements. This can be done by measuring the temperature of the cold junction (the point where the thermocouple is connected to the MAX31820PARMCR+T) using a thermometer and then adjusting the CJC value in the MAX31820PARMCR+T accordingly.
  • The maximum length of the thermocouple wires that can be used with the MAX31820PARMCR+T depends on the type of thermocouple and the desired accuracy of the temperature measurements. In general, it is recommended to keep the thermocouple wires as short as possible to minimize noise and interference. However, the MAX31820PARMCR+T can tolerate thermocouple wires up to 100 meters long with minimal degradation in accuracy.
  • No, the MAX31820PARMCR+T is designed to work with a single thermocouple. If multiple thermocouples need to be measured, multiple MAX31820PARMCR+T devices would be required, one for each thermocouple.
  • The power consumption of the MAX31820PARMCR+T depends on the operating mode and the frequency of the conversions. In normal operation, the power consumption is typically around 1.5mA. However, in shutdown mode, the power consumption is reduced to around 1μA.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX31820PARMCR+T Overview

Use the download button to access the MAX31820PARMCR+T schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX31, or try a keyword search, such as Temperature Sensors

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX31820PARMCR+T

Showing 0 results