Part Image

MAX319CSA+ - Analog Devices

Description: MAX319CSA+, Analogue Switch Single SPDT, 10 → 30 V, 8-Pin, SOIC, 1

Download MAX319CSA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX319CSA+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8 SO-3
click to zoom
3D Models
MAX319CSA+ - Analog Devices  - 3D model - Small Outline Packages - 8 SO-3
click to zoom

MAX319CSA+ Details

  • Manufacturer Part Number:

    MAX319CSA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    0.150 INCH, SO-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-05-25

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SPDT

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -4.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Off-state Isolation-Nom:

    68 dB

  • On-state Resistance Match-Nom:

    2 Ω

  • On-state Resistance-Max (Ron):

    35 Ω

  • Operating Temperature-Max:

    70 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Signal Current-Max:

    0.03 A

  • Supply Current-Max (Isup):

    0.005 mA

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    4.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    175 ns

  • Switch-on Time-Max:

    175 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

MAX319CSA+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX319CSA+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing noise coupling between the analog and digital sections. A 4-layer PCB with a dedicated analog ground plane is recommended. Additionally, keep the input traces short and away from digital signals.
  • To handle high-frequency noise in the MAX319CSA+ output, use a low-pass filter (LPF) or a band-pass filter (BPF) to filter out unwanted frequencies. You can also use a ferrite bead or a common-mode choke to reduce high-frequency noise. Additionally, ensure proper PCB layout and grounding to minimize noise coupling.
  • The maximum cable length for the MAX319CSA+ depends on the specific application and the type of cable used. As a general rule, keep the cable length as short as possible to minimize signal attenuation and noise pickup. For most applications, a cable length of up to 10 meters is acceptable, but this may vary depending on the specific use case.
  • To calibrate the MAX319CSA+, follow the calibration procedure outlined in the datasheet. This typically involves applying a known input voltage and adjusting the internal gain and offset registers to achieve accurate measurements. You may also need to perform temperature compensation and zero-scale calibration depending on your specific application.
  • The power-on reset (POR) timing for the MAX319CSA+ is typically around 10ms to 20ms, depending on the specific device and operating conditions. This means that the device requires a minimum of 10ms to 20ms of power-on time to ensure proper initialization and reset.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX319CSA+ Overview

Use the download button to access the MAX319CSA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX31, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX319CSA+

Showing 0 results

MAX319CSA+ Alternates

Showing results

Image Part Number Model
Part Image MAX319ESA+T Analog Devices Inc

SPDT, 1 Func, 1 Channel, CMOS, PDSO8

Part Image MAX319CSA+T Analog Devices Inc

SPDT, 1 Func, 1 Channel, CMOS, PDSO8

Part Image MAX319CSA+ Maxim Integrated Products

SPDT, 1 Func, 1 Channel, CMOS, PDSO8

Part Image MAX319ESA+T Maxim Integrated Products

SPDT, 1 Func, 1 Channel, CMOS, PDSO8

Part Image MAX319ESA-T Maxim Integrated Products

SPDT, 1 Func, 1 Channel, CMOS, PDSO8

For a full list of alternate parts for MAX319CSA+, check out Findchips.com