Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX327CSE+T - Analog Devices

Description: MAXIM INTEGRATED PRODUCTS - MAX327CSE+T - Analogue Switch, 4 Channels, SPST - NO, 3.5 kohm, 10V to 30V, ± 5V to ± 18V, NSOIC, 16 Pins

Download MAX327CSE+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX327CSE+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX327CSE+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - S16+1
click to zoom
3D Models
MAX327CSE+T - Analog Devices - 3D model - Small Outline Packages - S16+1
click to zoom

MAX327CSE+T Details

  • Manufacturer Part Number:

    MAX327CSE+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-SOIC_N-150_MIL

  • Package Description:

    SOP, SOP16,.25

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-SOIC_N-150_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-05-28

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SPST

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    9.9 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -18 V

  • Neg Supply Voltage-Min (Vsup):

    -5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NO

  • Number of Channels:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    16

  • Off-state Isolation-Nom:

    70 dB

  • On-state Resistance Match-Nom:

    75 Ω

  • On-state Resistance-Max (Ron):

    3500 Ω

  • Operating Temperature-Max:

    70 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Signal Current-Max:

    0.02 A

  • Supply Current-Max (Isup):

    0.25 mA

  • Supply Voltage-Max (Vsup):

    18 V

  • Supply Voltage-Min (Vsup):

    5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    500 ns

  • Switch-on Time-Max:

    1000 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

MAX327CSE+T Frequently Asked Questions (FAQs)

  • A good layout and routing practice for the MAX327CSE+T is to keep the analog and digital grounds separate, use a solid ground plane, and keep the signal traces short and away from noise sources. Additionally, use a common-mode filter or a ferrite bead to filter out high-frequency noise on the RS-232 lines.
  • To ensure reliable communication over long cables with the MAX327CSE+T, use a high-quality cable with a shielded twisted pair, keep the cable length as short as possible, and use a cable with a low capacitance per unit length. Additionally, consider using a repeater or a signal conditioner to boost the signal and improve signal integrity.
  • The maximum cable length supported by the MAX327CSE+T depends on the baud rate and the cable characteristics. As a general rule, the maximum cable length is around 50 feet (15 meters) at 9600bps, 20 feet (6 meters) at 19200bps, and 10 feet (3 meters) at 38400bps. However, this can vary depending on the specific application and cable used.
  • To handle hot-swapping or plug-and-play with the MAX327CSE+T, use a robust power-up and power-down sequence, and ensure that the device is properly powered down before disconnecting the cable. Additionally, consider using a hot-swap controller or a power-switching device to handle the power sequencing and protect the device from voltage transients.
  • The MAX327CSE+T has a maximum operating temperature of 85°C. To ensure reliable operation in high-temperature environments, use a heat sink or a thermal pad to dissipate heat, and ensure good airflow around the device. Additionally, consider using a thermally-enhanced package or a device with a higher temperature rating if the application requires it.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX327CSE+T Overview

Use the download button to access the MAX327CSE+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX32, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX327CSE+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX327CSE+T Alternates

Showing results

Image Part Number Model
Part Image MAX327CSE+ Analog Devices Inc

SPST, 4 Func, 1 Channel, CMOS, PDSO16
Part Image MAX327ESE+T Analog Devices Inc

SPST, 4 Func, 1 Channel, CMOS, PDSO16
Part Image MAX327ESE+ Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16
Part Image MAX327CSE-T Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16
Part Image MAX327CSE Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16
For a full list of alternate parts for MAX327CSE+T, check out Findchips.com