Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX38643AELT+T - Analog Devices

Description: Tiny 1.8V to 5.5V Input, 330nA IQ, 700mA nanoPower Buck Converter

Download MAX38643AELT+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX38643AELT+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX38643AELT+T - Analog Devices PCB footprint - Other - Other - MAX38643AELT+T-4
click to zoom
3D Models
MAX38643AELT+T - Analog Devices - 3D model - Other - MAX38643AELT+T-4
click to zoom

MAX38643AELT+T Details

  • Manufacturer Part Number:

    MAX38643AELT+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    6-LFCSP-2X2X0.75

  • Package Description:

    UDFN-6

  • Pin Count:

    6

  • Manufacturer Package Code:

    6-LFCSP-2X2X0.75

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2019-01-17

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SWITCHING REGULATOR

  • Input Voltage-Max:

    5.5 V

  • Input Voltage-Min:

    1.8 V

  • Input Voltage-Nom:

    3.3 V

  • JESD-30 Code:

    S-PDSO-N6

  • JESD-609 Code:

    e4

  • Length:

    2 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Current-Max:

    0.7 A

  • Output Voltage-Max:

    3.3 V

  • Output Voltage-Min:

    0.7 V

  • Output Voltage-Nom:

    1.8 V

  • Package Body Material:

    SQUARE

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC6,.08,25

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    0.8 mm

  • Surface Mount:

    YES

  • Switcher Configuration:

    BUCK

  • Terminal Finish:

    Gold/Nickel (Au/Ni)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    2 mm

MAX38643AELT+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX38643AELT+T involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a dedicated ground plane is recommended. Additionally, it's essential to follow the layout guidelines provided in the datasheet and application notes.
  • To ensure proper power-up and initialization of the MAX38643AELT+T, follow these steps: 1) Apply power to the device in the correct sequence (VCC, then VIN), 2) Ensure the input voltage (VIN) is within the recommended range, 3) Add a 10nF to 100nF decoupling capacitor between VCC and GND, 4) Use a pull-up or pull-down resistor on the EN pin to ensure it's in the correct state during power-up, and 5) Follow the recommended power-up sequence and timing in the datasheet.
  • The MAX38643AELT+T has a maximum junction temperature (TJ) of 150°C. To prevent overheating, ensure good airflow around the device, use a heat sink if necessary, and follow the thermal design guidelines in the datasheet. Additionally, keep the device away from other heat sources, and avoid blocking the airflow around the device. Monitor the device's temperature using the thermal monitoring pin (TMON) and take corrective action if the temperature exceeds the recommended limit.
  • To troubleshoot issues with the MAX38643AELT+T, follow these steps: 1) Verify the input voltage and current, 2) Check the output voltage and current, 3) Verify the enable pin (EN) is in the correct state, 4) Check for any short circuits or overloads, 5) Verify the device is properly powered up and initialized, 6) Check the thermal monitoring pin (TMON) for any thermal issues, and 7) Consult the datasheet and application notes for troubleshooting guides and FAQs.
  • Yes, the MAX38643AELT+T is a high-frequency device and requires proper EMI/EMC design considerations. Follow these guidelines: 1) Use a shielded enclosure, 2) Keep the input and output traces short and away from each other, 3) Use a common-mode choke or ferrite bead on the input and output lines, 4) Add decoupling capacitors to the input and output pins, and 5) Follow the EMI/EMC design guidelines in the datasheet and application notes.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX38643AELT+T Overview

Use the download button to access the MAX38643AELT+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX38, or try a keyword search, such as Switching Regulator or Controllers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX38643AELT+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑