Part Image

MAX44265EWT+T - Analog Devices

Description: MAXIM INTEGRATED PRODUCTS - MAX44265EWT+T - Operational Amplifier, 1 Amplifier, 200 kHz, 0.1 V/µs, 1.8V to 5.5V, WLP, 6 Pins

Download MAX44265EWT+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX44265EWT+T - Analog Devices PCB footprint - BGA - BGA - W61B1+1
click to zoom
3D Models
MAX44265EWT+T - Analog Devices  - 3D model - BGA - W61B1+1
click to zoom

MAX44265EWT+T Details

  • Manufacturer Part Number:

    MAX44265EWT+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    6-WLCSP-N/A

  • Package Description:

    6-WLCSP

  • Pin Count:

    6

  • Manufacturer Package Code:

    6-WLCSP-N/A

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Date Of Intro:

    2011-02-07

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.00003 µA

  • Bias Current-Max (IIB) @25C:

    0.00001 µA

  • Common-mode Reject Ratio-Min:

    70 dB

  • Common-mode Reject Ratio-Nom:

    80 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    5000 µV

  • JESD-30 Code:

    R-PBGA-B6

  • Length:

    1.27 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    VFBGA

  • Package Equivalence Code:

    BGA6,2X3,16

  • Package Shape:

    RECTANGULAR

  • Package Style:

    GRID ARRAY, FINE PITCH

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.69 mm

  • Slew Rate-Nom:

    0.1 V/us

  • Supply Current-Max:

    0.0055 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni)

  • Terminal Form:

    BALL

  • Terminal Pitch:

    0.4 mm

  • Terminal Position:

    BOTTOM

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    200

  • Voltage Gain-Min:

    10000

  • Wideband:

    NO

  • Width:

    0.865 mm

MAX44265EWT+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX44265EWT+T involves keeping the input and output traces short and away from each other, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a dedicated ground plane is recommended.
  • To ensure proper power-up and power-down, the MAX44265EWT+T requires a controlled voltage ramp-up and ramp-down. A soft-start circuit can be used to limit the inrush current during power-up, and a voltage supervisor can be used to ensure the device is fully powered down before the input voltage is removed.
  • The MAX44265EWT+T can drive a maximum capacitive load of 10nF. Exceeding this limit may cause the device to oscillate or become unstable. If a larger capacitive load is required, an external buffer or a device with a higher drive capability should be used.
  • To troubleshoot issues with the MAX44265EWT+T, start by checking the input voltage and current, and ensure that the device is properly powered up and powered down. Check the PCB layout for any signs of noise or interference, and verify that the output is properly terminated. Use an oscilloscope to measure the output voltage and current, and check for any signs of oscillation or ringing.
  • The MAX44265EWT+T is rated for operation up to 125°C, but its performance may degrade at high temperatures. Ensure that the device is properly heatsinked and that the PCB is designed to handle high temperatures. Consult the datasheet and application notes for more information on high-temperature operation.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX44265EWT+T Overview

Use the download button to access the MAX44265EWT+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX44, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX44265EWT+T

Showing 0 results

MAX44265EWT+T Alternates

Showing results

Image Part Number Model
Part Image MAX44265EWT+T Maxim Integrated Products

Operational Amplifier, 1 Func, 5000uV Offset-Max, BICMOS, PBGA6