Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX4715EXK+T - Analog Devices

Description: MAXIM INTEGRATED PRODUCTS - MAX4715EXK+T - Analogue Switch, Low Voltage, 1 Channels, SPST - NO, 1.2 ohm, 1.6V to 3.6V, SC-70, 5 Pins

Download MAX4715EXK+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX4715EXK+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX4715EXK+T - Analog Devices PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - MAX 21-0076 SC70
click to zoom
3D Models
MAX4715EXK+T - Analog Devices - 3D model - SOT23 (5-Pin) - MAX 21-0076 SC70
click to zoom

MAX4715EXK+T Details

  • Manufacturer Part Number:

    MAX4715EXK+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    5-SC70-N/A

  • Package Description:

    TSSOP, TSSOP5/6,.08

  • Pin Count:

    5

  • Manufacturer Package Code:

    5-SC70-N/A

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2001-05-02

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Additional Feature:

    CAN ALSO OPERATE AT 1.8V NOMINAL

  • Analog IC - Other Type:

    SPST

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e3

  • Length:

    2 mm

  • Moisture Sensitivity Level:

    1

  • Normal Position:

    NO

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Off-state Isolation-Nom:

    54 dB

  • On-state Resistance-Max (Ron):

    0.4 Ω

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP5/6,.08

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Signal Current-Max:

    0.3 A

  • Supply Current-Max (Isup):

    0.002 mA

  • Supply Voltage-Max (Vsup):

    3.6 V

  • Supply Voltage-Min (Vsup):

    1.6 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    12 ns

  • Switch-on Time-Max:

    18 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    1.25 mm

MAX4715EXK+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX4715EXK+T involves keeping the input and output traces short and separate, using a solid ground plane, and placing the device close to the input signal source. Additionally, it's recommended to use a 4-layer PCB with a dedicated analog ground layer to minimize noise and interference.
  • The MAX4715EXK+T has a thermal pad that must be connected to a thermal relief pattern on the PCB to ensure proper heat dissipation. A thermal via array or a thermal relief pattern with multiple vias can be used to connect the thermal pad to a heat sink or a metal plate. It's also important to ensure good airflow around the device to prevent overheating.
  • The recommended input filter configuration for the MAX4715EXK+T involves using a low-pass filter with a cutoff frequency of around 100 kHz to 200 kHz to filter out high-frequency noise and aliasing. A simple RC filter with a 1 kΩ resistor and a 10 nF capacitor can be used, but the exact values may vary depending on the specific application and noise environment.
  • The MAX4715EXK+T has an internal calibration circuit that can be used to trim the offset and gain errors. The device can be calibrated by applying a known input voltage and adjusting the internal calibration registers to achieve the desired accuracy. The calibration process typically involves a series of iterative measurements and adjustments to achieve the optimal accuracy.
  • The recommended power-up sequence for the MAX4715EXK+T involves powering up the device in the following order: VCC, AVCC, and then the digital interface (e.g., SPI or I2C). This ensures that the device powers up in a stable state and minimizes the risk of latch-up or other power-up related issues.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX4715EXK+T Overview

Use the download button to access the MAX4715EXK+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX47, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX4715EXK+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX4715EXK+T Alternates

Showing results

Image Part Number Model
Part Image MAX4715EXK+T Maxim Integrated Products

SPST, 1 Func, 1 Channel, CMOS, PDSO5
Part Image MAX4715EXK-T Rochester Electronics LLC

1-CHANNEL, SGL POLE SGL THROW SWITCH, PDSO5, SC-70, 5 PIN
Part Image MAX4715EXK-T Maxim Integrated Products

SPST, 1 Func, 1 Channel, CMOS, PDSO5