Part Image

MAX4805ACTJ+ - Analog Devices

Description: High Density/8 Channels Per Package I/O Protection for TX Burst Up to ±100V Very Fast Recovery Time After TX Burst 1.5µs (typ) OVP for Signals Greater Than ±2.7V Extremely Low Power Dissipation 8mW/ch (typ) 65Ω (typ) Low-Signal Output Impedance 44MHz -3dB Bandwidth (typ) Voltage Gain 6dB (MAX4805) (typ), 9dB (MAX4805A) (typ) Low Voltage Noise 2.2nV/ (typ) (MAX4805) Low Voltage Noise 2.2nV/ (typ) (MAX4805A) Low Current Noise 2.0pA/ (typ) (MAX4805) Low Current Noise 1.7pA/ (typ) (MAX4

Download MAX4805ACTJ+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX4805ACTJ+ - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - 32-LFCSP-5X5X0.75_2023-3
click to zoom
3D Models
MAX4805ACTJ+ - Analog Devices  - 3D model - Quad Flat No-Lead - 32-LFCSP-5X5X0.75_2023-3
click to zoom

MAX4805ACTJ+ Details

  • Manufacturer Part Number:

    MAX4805ACTJ+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    32-LFCSP-5X5X0.75

  • Package Description:

    TQFN-32

  • Pin Count:

    32

  • Manufacturer Package Code:

    32-LFCSP-5X5X0.75

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Date Of Intro:

    2010-05-11

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    2.264 µA

  • Bandwidth (3dB)-Nom:

    44 MHz

  • Frequency Compensation:

    NO

  • JESD-30 Code:

    S-XQCC-N32

  • JESD-609 Code:

    e3

  • Length:

    5 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    32

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC32,.2SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Seated Height-Max:

    0.8 mm

  • Slew Rate-Nom:

    25 V/us

  • Supply Current-Max:

    3 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    2 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Wideband:

    NO

  • Width:

    5 mm

MAX4805ACTJ+ Frequently Asked Questions (FAQs)

  • The recommended PCB layout for the MAX4805ACTJ+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. A 4-layer PCB with a dedicated analog ground plane is recommended.
  • To ensure proper power-up and power-down, the MAX4805ACTJ+ requires a monotonic power supply ramp-up and ramp-down. The device should be powered up and down slowly, with a minimum rise and fall time of 1ms, to prevent latch-up and ensure proper operation.
  • The MAX4805ACTJ+ can drive a maximum capacitive load of 100pF. Exceeding this limit may cause the device to oscillate or become unstable.
  • The MAX4805ACTJ+ has built-in ESD protection, but additional protection measures can be taken to ensure device reliability. These include using ESD-protected handling and storage procedures, and adding external ESD protection devices such as TVS diodes or ESD arrays.
  • The MAX4805ACTJ+ has a thermal derating of 6.4mW/°C above 25°C. This means that the device's power dissipation must be reduced as the ambient temperature increases to prevent overheating and ensure reliable operation.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX4805ACTJ+ Overview

Use the download button to access the MAX4805ACTJ+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX48, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX4805ACTJ+

Showing 0 results