Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX9295DGTM/VY+T - Analog Devices

Description: Dual 4-Lane MIPI CSI-2 v1.3 Ports • MIPI D-PHY v1.2 at 80Mbps - 2.5Gbps per Lane • 4-Channel CSI-2 Virtual-Channel Support • Support for RAW8/10/12/14/16/20, RGB565/666/ 888 and YUV8-/10-Bit Data Types • CSI-2 Inputs in GMSL2 Mode Accept Cameras with Different Video Timing and Resolution • CSI-2 ECC and Checksum Error Detection and Flagging • CSI-2 Lane Reassignment and Polarity Flip

Download MAX9295DGTM/VY+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX9295DGTM/VY+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX9295DGTM/VY+T - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - T4877Y+11
click to zoom
3D Models
MAX9295DGTM/VY+T - Analog Devices - 3D model - Quad Flat No-Lead - T4877Y+11
click to zoom

MAX9295DGTM/VY+T Details

  • Manufacturer Part Number:

    MAX9295DGTM/VY+T

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    TQFN-48

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Interface IC Type:

    INTERFACE CIRCUIT

  • JESD-30 Code:

    S-PQCC-N48

  • JESD-609 Code:

    e3

  • Length:

    7 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    48

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC48,.27SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    0.8 mm

  • Supply Voltage-Max:

    1.9 V

  • Supply Voltage-Min:

    1.7 V

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7 mm

MAX9295DGTM/VY+T Frequently Asked Questions (FAQs)

  • A good PCB layout is crucial for the MAX9295DGTM/VY+T. Ensure that the input and output tracks are separated, and the power supply decoupling capacitors are placed close to the device. Use a solid ground plane and avoid routing critical signals under the device. Refer to the application note AN-1149 for more detailed guidelines.
  • The MAX9295DGTM/VY+T has a programmable output voltage range of 0.8V to 3.3V. Choose an output voltage that matches your system's requirements. Consider factors like power consumption, noise tolerance, and compatibility with downstream components. You can use the device's internal voltage regulator or an external voltage reference to set the output voltage.
  • The MAX9295DGTM/VY+T has an absolute maximum input voltage rating of 4.5V. However, the recommended operating input voltage range is 2.7V to 3.6V. Exceeding the maximum input voltage can damage the device or affect its performance.
  • The MAX9295DGTM/VY+T has a built-in power-on reset (POR) function that resets the device during power-up. To ensure correct POR operation, ensure that the power supply voltage rises monotonically and does not droop during power-up. Also, add a capacitor (typically 1μF to 10μF) between the VCC pin and GND to filter out noise and ensure a clean power-up sequence.
  • The MAX9295DGTM/VY+T has an operating temperature range of -40°C to +125°C. However, the device's performance and reliability may be affected at extreme temperatures. Ensure that your system's operating temperature is within the recommended range for optimal performance and reliability.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX9295DGTM/VY+T Overview

Use the download button to access the MAX9295DGTM/VY+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX92, or try a keyword search, such as Other Interface ICs

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX9295DGTM/VY+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑