The recommended layout and placement for the MC34633 involves keeping the device away from high-current carrying traces, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane is also recommended.
To ensure proper power-up and initialization, make sure to follow the recommended power-up sequence, provide a stable input voltage, and add a 10kΩ pull-up resistor on the EN pin. Also, ensure that the input voltage is within the specified range and that the device is properly decoupled.
The maximum current rating for the MC34633's output pins is 500mA per pin, with a total current limit of 1A for all outputs combined. However, it's recommended to derate the current based on the ambient temperature and PCB design.
To configure the MC34633 for a specific output voltage, use the FB pin to set the output voltage through a resistive divider network. The ratio of the resistors determines the output voltage, and the datasheet provides a formula to calculate the required resistor values.
The EN (Enable) pin is used to enable or disable the MC34633. When the EN pin is high, the device is enabled, and when it's low, the device is disabled. The EN pin can be used to implement power sequencing, shutdown, or low-power modes.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MC34633 Overview
Use the download button to access the MC34633 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MC346,
or try a keyword search, such as Headers and Edge Type Connectors
