The recommended power-on sequence is to apply VDD first, followed by VLOGIC, and then the clock signal. This ensures proper initialization of the device.
The self-test function is enabled by setting the ST bit in the CTRL_REG1 register. During self-test, the device applies a known acceleration to the sensor and measures the response. The result can be read from the TEST_REG register.
The INT1 and INT2 pins are interrupt outputs that can be configured to trigger on various events, such as data ready, overrun, or threshold crossings. They can be used to wake up a microcontroller or signal an interrupt.
The MC3635 has a built-in calibration mechanism. Apply a known acceleration to the device (e.g., 1g) and read the output values. Then, calculate the sensitivity and offset values using the provided formulas in the datasheet.
The MC3635 can measure accelerations up to ±8g, but the maximum range can be limited by the specific configuration and settings used.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MC3635 Overview
Use the download button to access the MC3635 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MC363,
or try a keyword search, such as Other Sensors/Transducers
Suggested Parts
If you searched for MC3635, you might also be interested in these parts:
