ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane or a dedicated heat sink.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended derating curves for the device. Additionally, consider using a heat sink or thermal interface material to reduce the junction temperature. ROHM also recommends using a thermistor or temperature sensor to monitor the device temperature.
Although the datasheet specifies the recommended operating voltage range, the maximum allowable voltage for the input pins is typically 5.5V. However, it's essential to note that exceeding this voltage may cause permanent damage to the device.
Yes, the MCR01MRTF3402 can be used in switching regulator applications. However, it's crucial to ensure that the device is operated within its recommended switching frequency range (typically up to 1MHz) and that the output voltage is properly filtered to minimize ringing and overshoot.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input and output pins to prevent damage from electrostatic discharge. Additionally, follow proper handling and storage procedures to minimize the risk of ESD damage.
Trust Checks
This model has been generated by a fully automated process.
Machine Generated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MCR01MRTF3402 Overview
Use the download button to access the MCR01MRTF3402 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MCR01,
or try a keyword search, such as Metal Glaze/Thick Film Resistors