A thermal pad is recommended under the IC to improve heat dissipation. A minimum of 2oz copper thickness and a thermal relief pattern are also recommended.
Ensure that the input voltage is within the recommended range, and that the output capacitor is of sufficient value (at least 10uF) and ESR (less than 1 ohm) to maintain stability.
The maximum allowable ripple voltage on the input is 10% of the nominal input voltage. Exceeding this may affect the regulator's performance and stability.
Yes, but ensure that the junction temperature (Tj) does not exceed 125°C. Derate the output current accordingly based on the ambient temperature.
Use a TVS diode or a transient voltage suppressor in parallel with the input capacitor to protect the regulator from input voltage surges.
Trust Checks
This model has been generated by a fully automated process.
Machine Generated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MCR03EZPFX2004 Overview
Use the download button to access the MCR03EZPFX2004 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MCR03,
or try a keyword search, such as Fixed Resistors