ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane or a dedicated heat sink.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended derating curves for the device. Additionally, consider using a heat sink or thermal interface material to reduce the junction temperature. ROHM also recommends using a thermistor or temperature sensor to monitor the device temperature.
Although the datasheet specifies the recommended operating voltage range, it's essential to note that the input pins have a maximum allowable voltage of 6V, which should not be exceeded to prevent damage to the device.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input lines to protect the MCR03EZPFX7153 from electrostatic discharge. Additionally, follow proper handling and storage procedures to prevent ESD damage.
ROHM recommends storing the MCR03EZPFX7153 in a dry, cool place, away from direct sunlight and moisture. The storage temperature should be between -40°C to 125°C, and the humidity should be below 60%.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
MCR03EZPFX7153 Overview
Use the download button to access the MCR03EZPFX7153 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MCR03,
or try a keyword search, such as Fixed Resistors
