A good PCB layout for optimal thermal performance would be to have a large copper area on the bottom layer connected to the thermal pad, and to use thermal vias to dissipate heat. A 2-3 layer PCB with a solid ground plane is also recommended.
Ensure that the input voltage is within the recommended range (1.65V to 5.5V) and use a 0.1uF decoupling capacitor between VIN and GND, placed as close to the chip as possible. Additionally, use a 10uF bulk capacitor on the input power rail.
The maximum current rating for the output pins is 20mA. Exceeding this may cause damage to the chip or affect its reliability.
Implement overcurrent protection by using an external current sense resistor and a comparator to monitor the current. When the current exceeds the maximum rating, the comparator can trigger a reset or shutdown signal to protect the chip.
The recommended operating temperature range for the MCR03EZPJ1R0 is -40°C to 125°C. Operating outside this range may affect the chip's performance and reliability.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
MCR03EZPJ1R0 Overview
Use the download button to access the MCR03EZPJ1R0 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MCR03,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
