The recommended land pattern for the MCWR06X1000FTL can be found in the manufacturer's application notes or on their website. Typically, it involves a rectangular pad with a size of 2.5mm x 1.25mm, with a 0.5mm hole in the center for the chip resistor's terminal.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 270°C, and apply a small amount of solder paste to the pads. Use a soldering technique that minimizes the risk of overheating the component. A reflow oven can also be used for large-scale production.
The maximum power rating for the MCWR06X1000FTL is 0.5W. Exceeding this rating can cause the component to overheat, leading to reduced lifespan or even failure.
The MCWR06X1000FTL is a general-purpose chip resistor, and its frequency response is limited. For high-frequency applications, consider using a specialized high-frequency resistor or a thin-film resistor, which are designed to minimize parasitic inductance and capacitance.
The MCWR06X1000FTL has a maximum operating temperature of 155°C. Exceeding this temperature can cause the component to degrade or fail. If your application requires high-temperature operation, consider using a high-temperature-resistant resistor or a ceramic resistor.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MCWR06X1000FTL Overview
Use the download button to access the MCWR06X1000FTL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MCWR0,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
