Description:The resistors are constructed in a high grade ceramic body (aluminum oxide).
Internal metal electrodes are added at each end and connected by a resistive paste
that is applied to the top surface of the substrate. The composition of the paste is
adjusted to give the approximate resistance required and the value is trimmed to
within tolerance by laser cutting of this resistive layer.
The resistive layer is covered with a protective coat. Finally, the two external
end terminations are added. For ease of
The recommended land pattern for the MCWR06X6201FTL can be found in the IPC-7351 standard or in the manufacturer's application notes. It typically includes a rectangular pad with a size of around 1.5mm x 0.8mm, with a solder mask clearance of 0.1mm.
The MCWR06X6201FTL has a high power rating, so thermal management is crucial. Ensure good airflow around the component, and consider using a heat sink or thermal pad to dissipate heat. The component's thermal resistance (Rth) is typically around 10°C/W.
The MCWR06X6201FTL has an operating temperature range of -55°C to +150°C, but the maximum operating temperature may vary depending on the specific application and power rating. Always check the datasheet and manufacturer's recommendations for specific temperature ratings.
The MCWR06X6201FTL is designed to withstand moderate vibration, but extreme vibration may affect its performance and reliability. If your application involves high vibration, consider using a component with a higher vibration rating or adding additional mechanical support.
The MCWR06X6201FTL has a moisture sensitivity level (MSL) of 1, which means it can withstand normal humidity levels. However, in extremely humid environments, consider using a conformal coating or potting compound to protect the component from moisture ingress.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MCWR06X6201FTL Overview
Use the download button to access the MCWR06X6201FTL schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MCWR0,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
