Description:The MK3722 is a low cost, low jitter, high performance VCXO and PLL clock synthesizer designed to replace expensive discrete VCXOs and multipliers. The patented on-chip Voltage Controlled Crystal Oscillator accepts a 0 to 3.3 V input voltage to cause the output clocks to vary by ±115 ppm. Using IDT's analog/digital Phase-Locked Loop (PLL) techniques, the device uses an inexpensive 27 MHz pullable crystal input to produce a reference output and a selectable audio clock. IDT manufactures the largest variety o
Renesas provides a recommended PCB layout guide in their application note (APN) documents, which includes guidelines for thermal vias, copper pours, and component placement to ensure optimal thermal performance.
The MK3722GLFTR has a built-in overcurrent protection feature, but it's not enabled by default. To implement overcurrent protection, you need to set the OCP (OverCurrent Protection) pin high and configure the OCP threshold using external resistors. Refer to the datasheet and application notes for specific implementation details.
The maximum allowed voltage on the VCC pin during power-up and power-down sequences is 6.5V. Exceeding this voltage may damage the device. It's essential to ensure that the power supply voltage ramps up and down slowly to prevent voltage overshoots.
To troubleshoot I2C interface issues, use a logic analyzer or oscilloscope to monitor the SCL and SDA lines. Check for proper signal levels, clock frequency, and data transmission. Ensure that the I2C bus is properly terminated, and that there are no bus conflicts or signal reflections.
The recommended operating temperature range for the MK3722GLFTR is -40°C to 125°C. However, the device can operate up to 150°C for short periods during power-up and power-down sequences. Prolonged operation above 125°C may affect the device's reliability and lifespan.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MK3722GLFTR Overview
Use the download button to access the MK3722GLFTR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MK372,
or try a keyword search, such as Clock Generators
