The MP8763GLE-Z can handle input voltages up to 24V, but it's recommended to keep it below 18V for optimal performance and reliability.
To minimize EMI, keep the input and output capacitors close to the IC, use a solid ground plane, and keep the high-current paths short and direct. Also, consider using a shielded inductor and placing the IC away from sensitive analog circuits.
The recommended output capacitor value is 10uF to 22uF, and it's recommended to use a low-ESR ceramic capacitor, such as an X5R or X7R type, to minimize output voltage ripple and ensure stability.
The output voltage of the MP8763GLE-Z can be adjusted by changing the resistor divider ratio between the FB pin and the output voltage. A higher resistor value will increase the output voltage, while a lower value will decrease it.
The MP8763GLE-Z can deliver up to 3A of output current, but it's recommended to derate the output current based on the ambient temperature and the input voltage to ensure reliable operation.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MP8763GLE-Z Overview
Use the download button to access the MP8763GLE-Z 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MP876,
or try a keyword search, such as Switching Regulator or Controllers
