Caddock recommends a symmetrical layout with the resistor centered on the PCB, and a land pattern with a minimum of 0.05 inches (1.27 mm) between the resistor pads and other components to minimize thermal and electrical interactions.
The MP9100-8.00-1% is designed for high-frequency applications and exhibits low inductance and capacitance, making it suitable for frequencies up to 1 GHz. However, it's essential to consider the PCB layout and surrounding components to minimize parasitic effects.
The maximum power rating for the MP9100-8.00-1% in pulse applications depends on the pulse duration and frequency. As a general guideline, Caddock recommends derating the power rating by 20% for pulse applications. Consult the manufacturer for specific guidance.
Yes, Caddock recommends using a soldering iron with a temperature of 250°C (482°F) or less, and a solder with a melting point of 180°C (356°F) or higher. Avoid using excessive soldering temperatures or times, as this can damage the resistor.
The MP9100-8.00-1% is designed to provide a long lifespan and high reliability. Caddock estimates a minimum lifespan of 10 years at 70°C (158°F) with a failure rate of less than 1% per 1,000 hours. However, actual lifespan may vary depending on environmental and operating conditions.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MP9100-8.00-1% Overview
Use the download button to access the MP9100-8.00-1% schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MP910,
or try a keyword search, such as Metal Glaze/Thick Film Resistors
