Microsemi recommends a PCB layout with a solid ground plane, short and wide traces for the input and output pins, and a decoupling capacitor (e.g., 10nF) between the VCC and GND pins to reduce noise and improve stability.
The MPLAD30KP260CA requires a bias voltage of 3.3V or 5V on the VCC pin, and a bias current of 1.5mA or 3mA, respectively. Ensure the bias voltage is stable and within the recommended range to maintain optimal performance.
The MPLAD30KP260CA is rated for operation from -40°C to +125°C, but it's recommended to operate within -20°C to +85°C for optimal performance and reliability.
The MPLAD30KP260CA has built-in ESD protection, but it's still recommended to follow proper ESD handling procedures, such as using an ESD wrist strap or mat, and storing the device in an anti-static bag or container.
Store the MPLAD30KP260CA in a dry, cool place (less than 30°C and 60% relative humidity) away from direct sunlight and moisture. Avoid storing the device in a location with high temperatures, humidity, or exposure to chemicals.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MPLAD30KP260CA Overview
Use the download button to access the MPLAD30KP260CA schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like MPLAD,
or try a keyword search, such as Transient Suppressors
