A recommended PCB layout for the MPMA1002AT5 is to use a ground plane underneath the device, and to keep the input and output traces as short as possible. Additionally, it's recommended to use a 10nF capacitor between the VIN pin and GND to filter out noise.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the pads. Avoid applying excessive heat or pressure, which can damage the device.
The MPMA1002AT5 is rated for operation from -40°C to 125°C, but it's recommended to operate within the -20°C to 85°C range for optimal performance and reliability.
The MPMA1002AT5 is designed to withstand moderate vibration, but it's not recommended for use in extremely high-vibration environments. If vibration is a concern, consider using a device with a more robust mechanical design or adding additional mechanical support.
The MPMA1002AT5 has built-in ESD protection, but it's still recommended to follow proper ESD handling procedures when handling the device. Use an ESD wrist strap or mat, and avoid touching the device's pins or leads.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MPMA1002AT5 Overview
Use the download button to access the MPMA1002AT5 schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like MPMA1,
or try a keyword search, such as Array/Network Resistors
