The MPQ8633BGLE-Z can handle input voltages up to 24V, but it's recommended to keep the input voltage below 18V for optimal performance and reliability.
To ensure the stability of the output voltage, make sure to use a sufficient output capacitor (at least 10uF) and a low-ESR capacitor (less than 1 ohm) to minimize output voltage ripple and oscillation.
The MPQ8633BGLE-Z can provide up to 3A of output current, but it's recommended to keep the output current below 2.5A for optimal performance and reliability.
The soft-start function can be configured by connecting a capacitor (typically 10nF to 100nF) between the SS pin and GND. The soft-start time can be adjusted by changing the value of the capacitor.
The EN (enable) pin is used to enable or disable the regulator. Connect the EN pin to VIN to enable the regulator, or connect it to GND to disable it. You can also use an external signal to control the EN pin for dynamic voltage scaling or power sequencing.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MPQ8633BGLE-Z Overview
Use the download button to access the MPQ8633BGLE-Z 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MPQ86,
or try a keyword search, such as Switching Regulator or Controllers
Suggested Parts
If you searched for MPQ8633BGLE-Z, you might also be interested in these parts:
