The recommended PCB layout for the MPSW55G involves keeping the input and output traces as short as possible, using a solid ground plane, and placing a 10uF capacitor between the VIN and GND pins. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
The output voltage of the MPSW55G can be calculated using the formula: VOUT = (VIN x (R1 / (R1 + R2))) + (VREF x (R2 / (R1 + R2))), where R1 and R2 are the resistors used in the feedback network, VIN is the input voltage, and VREF is the reference voltage (typically 2.5V).
The maximum input voltage that the MPSW55G can handle is 28V. Exceeding this voltage may cause damage to the device.
To ensure stability and prevent oscillations in the MPSW55G, it's recommended to use a compensation capacitor (CC) between the COMP and GND pins, and to choose the correct values for the feedback resistors (R1 and R2) and the output capacitor (CO). The datasheet provides guidelines for selecting these components.
The typical efficiency of the MPSW55G is around 95% to 98% depending on the input voltage, output voltage, and load current. The efficiency can be calculated using the formula: Efficiency = (POUT / PIN) x 100%, where POUT is the output power and PIN is the input power.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MPSW55G Overview
Use the download button to access the MPSW55G schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like MPSW5,
or try a keyword search, such as Small Signal Bipolar Transistors
