Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MPX700DP - Motorola

Description: 0 to 700 Kpa ( 0-100 Psi ) 60 MV Full Scale Span ( Typical )–40 to +125 °C

Download MPX700DP Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MPX700DP - Motorola - PCB symbol
click to zoom
PCB Footprints
MPX700DP - Motorola PCB footprint - Other - Other - CASE 344C–01 ISSUE B
click to zoom
3D Models
MPX700DP - Motorola - 3D model - Other - CASE 344C–01 ISSUE B
click to zoom

MPX700DP Details

  • Manufacturer Part Number:

    MPX700DP

  • Part Life Cycle Code:

    Obsolete

  • Package Description:

    CASE 344C-01, 4 PIN

  • Manufacturer:

    Motorola Semiconductor Products

  • YTEOL:

    0

  • Body Breadth:

    10.67 mm

  • Body Height:

    28.7 mm

  • Body Length or Diameter:

    29.46 mm

  • Mounting Feature:

    THROUGH HOLE MOUNT

  • Offset-Nom:

    20MV

  • Operating Current-Max:

    6 mA

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Range:

    20-80mV

  • Output Type:

    ANALOG VOLTAGE

  • Package Shape/Style:

    ROUND

  • Port Type:

    BARBED

  • Pressure Range-Max:

    101.52 Psi

  • Pressure Sensing Mode:

    DIFFERENTIAL

  • Response Time:

    1000 µs

  • Sensors/Transducers Type:

    PRESSURE SENSOR,PIEZORESISTIVE

  • Supply Voltage-Max:

    6 V

  • Supply Voltage-Min:

    3 V

  • Surface Mount:

    NO

  • Termination Type:

    SOLDER

MPX700DP Frequently Asked Questions (FAQs)

  • The recommended PCB layout for the MPX700DP involves placing the sensor on a dedicated analog ground plane, keeping the analog and digital grounds separate, and using a low-pass filter to reduce noise. A 4-layer PCB with a dedicated ground plane is recommended.
  • The MPX700DP requires a two-point calibration process. Apply a known pressure (e.g., atmospheric pressure) and measure the output voltage. Then, apply a second known pressure (e.g., a calibrated pressure source) and measure the output voltage. Use these two points to calculate the sensitivity and offset of the sensor.
  • The MPX700DP is designed to measure pressures up to 700 kPa (100 psi). Exceeding this range may damage the sensor or affect its accuracy.
  • The MPX700DP has a built-in temperature sensor, but it requires external temperature compensation. Use a thermistor or other temperature sensor to measure the temperature and apply a correction factor to the pressure reading based on the temperature coefficient specified in the datasheet.
  • The recommended power supply voltage for the MPX700DP is 5V ± 10%. Operating the sensor outside of this range may affect its accuracy or damage the device.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MPX700DP Overview

Use the download button to access the MPX700DP schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MPX70, or try a keyword search, such as Pressure Sensors

Parts related to MPX700DP

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑