Coilcraft provides a recommended PCB land pattern in their application notes, which can be found on their website. The recommended land pattern is a rectangular pad with dimensions of 3.8 mm x 2.5 mm, with a 1.3 mm x 1.3 mm thermal pad in the center.
The MSD1278-154KLD's inductance and Q values are sensitive to temperature and frequency. To minimize these effects, it's recommended to use a temperature range of -40°C to 125°C and operate within the specified frequency range of 100 kHz to 500 MHz. Additionally, consider using a temperature compensation circuit or a more stable inductor if your application requires high accuracy.
The maximum current rating for the MSD1278-154KLD is not explicitly stated in the datasheet. However, according to Coilcraft's application notes, the maximum current rating can be calculated using the inductor's resistance (Rdc) and the desired temperature rise. As a general guideline, the maximum current rating is around 1.5 A to 2 A, but this may vary depending on the specific application and operating conditions.
The MSD1278-154KLD is a surface-mount device and can be susceptible to vibration-induced failures. However, Coilcraft's testing has shown that the inductor can withstand vibrations up to 20 G's. If your application requires higher vibration resistance, consider using a more ruggedized inductor or adding additional mechanical support to the PCB.
To ensure proper soldering, follow Coilcraft's recommended soldering profile, which can be found in their application notes. The recommended profile is a peak temperature of 260°C for 10-15 seconds, with a maximum temperature of 240°C for 30 seconds. Additionally, use a solder with a melting point of 217°C or higher, and ensure the PCB is clean and free of oxidation.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MSD1278-154KLD Overview
Use the download button to access the MSD1278-154KLD schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MSD12,
or try a keyword search, such as Fixed Inductors
About COILCRAFT
Colicraft designs and manufactures high performing magnectic components, RF chip inductors, power magnectics, and filters. Coilcraft has engineering, manufacturing, and distribution facilities in North America, Asia, and Europe.
