MSS1583-223MED - COILCRAFT

MSS1583-223MED Frequently Asked Questions (FAQs)

• What is the recommended land pattern for MSS1583-223MED?
  Coilcraft recommends a land pattern with a pad size of 2.5 mm x 1.5 mm, with a non-solder mask defined (NSMD) pad and a 0.5 mm gap between pads. Refer to Coilcraft's application note AN-111 for more details.
• Can I use MSS1583-223MED in a high-temperature environment?
  The MSS1583-223MED is rated for operation up to 125°C. However, derating is required for temperatures above 85°C. Consult Coilcraft's temperature derating chart to determine the maximum current rating for your specific application.
• How do I handle the MSS1583-223MED's sensitivity to mechanical stress?
  To minimize the risk of mechanical stress affecting the inductor's performance, avoid bending or flexing the component during handling or assembly. Use a pick-and-place machine or a vacuum pickup tool to handle the component, and ensure the PCB is properly supported during assembly.
• What is the self-resonant frequency (SRF) of the MSS1583-223MED?
  The SRF of the MSS1583-223MED is not explicitly stated in the datasheet. However, according to Coilcraft's inductor selection guide, the SRF for this part is typically above 100 MHz. For more accurate information, contact Coilcraft's technical support or consult their application notes.
• Can I use the MSS1583-223MED in a high-frequency application?
  While the MSS1583-223MED is suitable for high-frequency applications, its performance may degrade above 50 MHz due to the inductor's internal capacitance and resistance. For frequencies above 50 MHz, consider using a more specialized high-frequency inductor from Coilcraft's portfolio.