Part Image

MT25QL128ABB1ESE-0AUT - Micron

Description: NOR Flash SERIAL NOR SLC 32MX4 SOIC

Download MT25QL128ABB1ESE-0AUT Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MT25QL128ABB1ESE-0AUT - Micron PCB footprint - Small Outline Packages - Small Outline Packages - SOP2-8--
click to zoom
3D Models
MT25QL128ABB1ESE-0AUT - Micron  - 3D model - Small Outline Packages - SOP2-8--
click to zoom

MT25QL128ABB1ESE-0AUT Details

  • Manufacturer Part Number:

    MT25QL128ABB1ESE-0AUT

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SOP-8

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Manufacturer:

    Micron Technology Inc

  • YTEOL:

    5.65

  • Clock Frequency-Max (fCLK):

    133 MHz

  • Data Retention Time-Min:

    20

  • Endurance:

    100000 Write/Erase Cycles

  • JESD-30 Code:

    S-PDSO-G8

  • Length:

    5.285 mm

  • Memory Density:

    134217728 bit

  • Memory IC Type:

    FLASH

  • Memory Width:

    8

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    16777216 words

  • Number of Words Code:

    16000000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    16MX8

  • Output Characteristics:

    3-STATE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.3

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    NOT SPECIFIED

  • Programming Voltage:

    3 V

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    2.16 mm

  • Serial Bus Type:

    QSPI

  • Standby Current-Max:

    0.0002 A

  • Supply Current-Max:

    0.035 mA

  • Supply Voltage-Max (Vsup):

    3.6 V

  • Supply Voltage-Min (Vsup):

    2.7 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    NOT SPECIFIED

  • Type:

    NOR TYPE

  • Width:

    5.285 mm

  • Write Protection:

    HARDWARE/SOFTWARE

MT25QL128ABB1ESE-0AUT Frequently Asked Questions (FAQs)

  • The maximum operating temperature range for the MT25QL128ABB1ESE-0AUT is -40°C to 85°C.
  • The HOLD# signal should be asserted low to pause the current operation and de-asserted high to resume the operation. During the hold state, the device will tri-state its outputs and ignore any further input signals.
  • The WP# pin is used to prevent accidental writes to the status register. When WP# is low, the status register is write-protected, and when WP# is high, the status register can be written.
  • The MT25QL128ABB1ESE-0AUT is a 128Mb (16MB) flash memory device, organized as 2,097,152 words of 8 bits each.
  • The recommended power-up sequence is to apply VCC first, followed by VPP (if used), and then the clock signal. The device is not guaranteed to function correctly if the power-up sequence is not followed.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MT25QL128ABB1ESE-0AUT Overview

Use the download button to access the MT25QL128ABB1ESE-0AUT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MT25Q, or try a keyword search, such as Flash Memories

Parts related to MT25QL128ABB1ESE-0AUT

Showing 0 results