A good PCB layout for the MUR860 involves keeping the leads as short as possible, using a ground plane, and minimizing the distance between the device and the load. A 4-layer PCB with a dedicated ground plane is recommended.
To ensure proper biasing, the MUR860 requires a minimum of 1.5V to 2.5V on the gate (G) pin, and the source (S) pin should be connected to a low-impedance source, such as a voltage regulator or a battery. The drain (D) pin should be connected to the load.
The maximum allowable power dissipation for the MUR860 is 2.5W. Exceeding this limit can cause the device to overheat, leading to reduced performance or even failure.
To protect the MUR860 from ESD, handle the device by the body or use an anti-static wrist strap. Ensure the PCB is designed with ESD protection in mind, and consider adding ESD protection devices, such as TVS diodes, to the circuit.
The recommended operating temperature range for the MUR860 is -55°C to 150°C. Operating the device outside this range can affect its performance and reliability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MUR860 Overview
Use the download button to access the MUR860 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MUR86,
or try a keyword search, such as Rectifier Diodes
